Wrist Strap* CB-2LYE *1 Do not peel off the adhesive covering from a battery pack. *2 For attachment instructions, refer to the Camera User Guide that can be downloaded from the Canon website. • Printed matter is also included. •...
Manuals and Software Manuals and Software You can download manuals and software from the following URL. http://www.canon.com/icpd/ • With a computer connected to the Internet, access the above URL. • Access the site for your country or region. • Adobe Reader is required to view the manuals.
Initial Preparations Insert the battery pack. ( 1 ) After aligning the marks on the battery pack and charger, insert the battery pack ( 2 ) by pushing it in (1) and down (2). Charge the battery pack. Plug the power cord into the charger, then plug the other end into a power outlet.
Initial Preparations Check your card’s write-protect switch and insert the memory card. Recording is not possible on memory cards with a write-protect switch when the switch is in the locked position. Move the switch toward (1). Insert the memory card with the terminals (2) facing as shown until it clicks into place.
Initial Preparations Specify your home time zone. Press the [ ][ ] buttons to choose your home time zone. Press the [ ] button when finished. After a confirmation message, the setting screen is no longer displayed. To turn off the camera, press the ON/OFF button.
Trying the Camera Out Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Turn the camera on and enter ] mode. Press the ON/OFF button. Set the mode dial to [ Compose the shot.
Trying the Camera Out Recording Movies Press the movie button to start recording, and press it again to stop. Viewing Enter Playback mode. Press the [ ] button. Choose images. To view the previous or next image, press the [ ][ ] buttons or turn the [ ] dial. Movies are identified by a [ ] icon.
Need help?
Do you have a question about the PowerShot SX710 HS and is the answer not in the manual?
Questions and answers