Page 1
Sending still images and movies between two Canon-brand cameras (PowerShot SX710 HS / PowerShot SX610 HS)
Page 2
NOTE • Only Canon-brand cameras equipped with a Wi-Fi function can be connected to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected to if they do not have a Wi-Fi function.
Page 3
Press the [ ], [ ] buttons to choose [OK] and press the [ ] button. The nickname can also be changed from this screen. To change the nickname, press the < FUNC./SET > ( ) button, and enter a new nickname with the displayed keyboard. This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi.
Page 4
4. Press the [ ], [ ] buttons to choose [Add a Device], and then press the <FUNC./SET> ( ) button. NOTE • If you register a camera, that camera's name will appear on the screen in step 4. From the second time onward, select the camera's name to make the connection.
Page 5
6. Once both cameras are connected, a screen similar to the following one will be displayed. NOTE Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you press the [ ] button to access the Wi-Fi menu. You can easily connect again by pressing the [ ], [ ] buttons to choose the device and then pressing the [...
Page 6
NOTE • Choosing the Number of Recording Pixels (Image Size) On the image transfer screen, choose [ ] by pressing the [ ], [ ] buttons, and then press the [ ] button. On the screen displayed, choose the recording pixel setting (image size) by pressing the [ ], [ ] buttons, and then press the [...
Page 7
10. Press the [ ], [ ] buttons to choose the desired method, and then press the [ ] button. *[Select] has been chosen in the example image below. 11. A screen similar to the following one will be displayed. Press the [ ], [ ], [...
Page 8
12. A screen similar to the following one will be displayed. Press the [ ], [ ] buttons to choose [OK]. 13. A screen similar to the following one will be displayed. Press the [ ], [ ] buttons to choose [Send], and then press the <FUNC./SET> ( ) button.