Setting The Date And Time - Canon PowerShot SX700 HS User Manual

3
Check the card's write-protect
tab and insert the memory card.
z z
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
z z
Insert the memory card facing as shown
until it clicks into the locked position.
z z
Make sure the memory card is facing the
Terminals
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
4
Close the cover.
z z
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
•
For guidelines on how many shots or hours of recording can be saved on one
memory card, see "Number of 4:3 Shots per Memory Card"
Removing the Battery Pack and Memory Card
Remove the battery pack.
z z
Open the cover and press the battery
lock in the direction of the arrow.
z z
The battery pack will pop up.

Setting the Date and Time

Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish
(= 190).
Remove the memory card.
z z
Push the memory card in until it clicks,
and then slowly release it.
z z
The memory card will pop up.
(= 38).
1
Turn the camera on.
z z
Press the power button.
z z
The [Date/Time] screen is displayed.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Tv, Av, and M Mode Tv, Av, and M Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
14