Canon PowerShot SX700 HS User Manual page 118

7
Enter the access point
password.
z z
Press the <m> button to access the
keyboard, and then enter the password
(= 124).
z z
Press the <o><p> buttons or turn the
<5> dial to choose [Next], and then
press the <m> button.
8
Choose [Auto] and establish the
connection.
z z
Press the <o><p> buttons or turn the
<5> dial to choose [Auto], and then
press the <m> button.
z z
Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
9
Enter the authentication code.
z z
On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
z z A six-digit confirmation number is
displayed.
10
Check the confirmation
numbers and complete the
setup process.
z z Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
z z
Press the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
z z
Complete the setup process on the
smartphone or computer.
z z
[ ] (=
GATEWAY are now added as
destinations, and the [
to [ ].
z z
A message is displayed on the
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure in
"Registering Other Web Services" from
step 2 (=
•
You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 5 – 7 in "Connecting to WPS-
Compatible Access Points" (= 125 – 126).
139) and CANON iMAGE
] icon changes
119).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Tv, Av, and M Mode Tv, Av, and M Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
118