Canon PowerShot SX700 HS User Manual page 63

Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(= 76). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
z z
Follow steps 1 – 2 in "Specific Scenes"
(=
press the <l> button.
z z
Press the <q><r> buttons or turn the
<5> dial to choose [
the <l> button.
2
Compose the shot and press
the shutter button halfway.
z z
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the
way down.
z z
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
z z
The lamp blinks and the self-timer sound
is played.
Still Images
55) and choose [ ], and then
], and then press
4
Join the subjects in the
shooting area and look at the
camera.
z z
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
z z
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
•
Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
•
To change the number of shots, press the <o><p> buttons after choosing
49) is only available for the final shot.
[ ] in step 1. [Blink Detection] (=
•
The zoom factor cannot be changed with the <
shutter button all the way down.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Tv, Av, and M Mode Tv, Av, and M Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
> button after you press the
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
63