Screen Brightness; Formatting Memory Cards - Canon PowerShot SX700 HS User Manual

Screen Brightness

Adjust screen brightness as follows.
z z
Choose [LCD Brightness], and then
press the <q><r> buttons to adjust the
brightness.
•
For maximum brightness, press and hold the <l> button for at least
two seconds when the shooting screen is displayed or when in single-image
display. (This will override the [LCD Brightness] setting on the [3] tab.) To
restore the original brightness, press and hold the <l> button again for at
least two seconds or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
z z
Choose [Start-up Image], and then
choose [Off].

Formatting Memory Cards

Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
1
Access the [Format] screen.
z z
Choose [Format], and then press the
<m> button.
2
Choose [OK].
z z
Press the <o><p> buttons to choose
[Cancel], choose [OK] (either press the
<q><r> buttons or turn the <5> dial),
and then press the <m> button.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Tv, Av, and M Mode Tv, Av, and M Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
149