Initial Preparations - Canon PowerShot SX500 IS Getting Started

Initial Preparations

Prepare for shooting as follows.
Attaching the Strap
Holding the Camera
10
1
Attach the strap.
z z Attach the included strap to the camera
as shown.
z z
On the other side of the camera, attach
the strap the same way.
2
Attach the lens cap to the strap.
z z Remove the lens cap from the camera
and attach the lens cap cord to the strap.
z z
Always remove the lens cap before
turning the camera on.
z z Keep the lens cap on the lens when the
camera is not in use.
z z Place the strap around your neck.
z z When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.