Removing Scratches From Bumper - Hussmann P/N 0420057_B Installation And Operation Manual

Service merchandisers
Table of Contents

Advertisement

5-6
M
AINTENANCE
STEP 16 – Reassemble in reverse order.
Turn on power, then
refrigeration. Make
certain merchandiser
has cooled to operating
temperature before
restocking.
CLEANING ANTI-REFLECTIVE GLASS
Anti-Reflective Glass
While the anti-reflective coatings are durable,
they are susceptible to scratching if abrasive
materials are used for cleaning. Once the glass
surfaces are scratched, it is impossible to restore
the original finish. Special care must be taken to
prevent damage when cleaning the glass.
Anti-reflective glass can be cleaned with clear
water or any non-alkaline detergent.
However, it is very important to use a soft
cloth, a micro-fiber cleaning cloth or a wet
sponge.
Never use the following types of materials
to clean glass with anti-reflective coatings:
• Coarse Paper Towels
• Scouring Pads or Powders
• Steel Wool or Steel Fiber Materials
• Blades
• Acidic or highly Alkaline detergents
• Fluorine based detergents
P/N 0420057_B
REMOVING SCRATCHES FROM
BUMPER
Most scratches and dings can be removed using
the following procedure.
1. Use steel wool to smooth out the surface
area of the bumper.
2. Clean area.
3. Apply vinyl or car wax and polish surface
for a smooth glossy finish.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Impact

Table of Contents