Connecting Your Phone - D-Link Vonage Quick Start Manual

Step 4:

Connecting Your Phone

1.
Plug the Vonage telephone cord into your phone or unplug
your existing phone cord from the wall and plug it into the
phone port directly on the Vonage Device.
NOTE: If not done so already, disconnect phone from wall.
2.
Plug the other end into the
back of the Vonage Device.
NOTE: Make sure the phone light is solid.
3.
Pick up your handset.
NOTE: When you pick up your phone to check for a dial tone,
the phone light will blink.
If you hear a dial tone, congratulations!
You've set up your Vonage service correctly, and can
now start making calls. To configure your voicemail and
other included services features, simply login to your
web account at www.vonage.com.
14
Green Phone 1 Port on the
Vonage Device
This is what your set up should look like with an existing modem:
Existing Modem
Computer
Vonage Device
This is what your set up should look like with both an existing
modem and router:
Existing Modem
Existing Router
proceed to Troubleshooting
If you do not hear a dial tone,
on page 17.
Phone
Computer
Phone
Vonage Device
15