D-Link Vonage Quick Start Manual page 5

Step 3:
Set up your Vonage Device
(with existing Modem only)
1.
Shut down your computer and unplug your existing
Modem's power cord.
2.
Attach the antenna to your Vonage Device.
3.
Unplug the Ethernet cable that connects your
Modem to your Computer. Unplug the cable from
both your Modem and your computer. Leave your
Modem connected to your Internet connection (the
DSL or Cable line from your Internet provider).
4.
Wait 10 minutes for your Modem to clear its
memory completely.
6
5.
6.
Existing Modem
Connect one end of the blue cable to the Ethernet port
on your Modem. Connect the other end to the
labeled "Internet" on the back of the Vonage Device.
Connect one end of the yellow cable
port labeled "Ethernet 1" on the back of the Vonage
Device. Connect the other end to the Ethernet port on
your Computer that you unplugged earlier.
Vonage Device
blue port
Vonage Device
to the yellow
7