Section 3 - Configuration
Connecting to a Wireless Network
WPS Button
The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such
as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software
utility with WPS) that you can press to connect to the router. Please refer to your user manual for the wireless device you want
to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the router for about 1 second. The wireless LEDs will start to blink.
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the LEDs stop blinking, you will be connected using
WPA2 encryption.
D-Link DWR-960 User Manual
54