3D Setup - Epson PowerLite Home Cinema 5020UB User Manual

■ RGBCMY
Image > Advanced > RGBCMY
Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color
components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press
to move to another menu option. You can also access this setting by pressing the
Esc
RGBCMY
■ Gamma
Image > Advanced > Gamma
You can select from five gamma settings (2.0 to 2.4) or customize your own setting from
your image or a displayed graph. Lower values will increase the contrast of dark areas, but
tend to blur the bright areas. Higher values will darken the light areas. See page 36 for
more information.

3D Setup

Use the options in the 3D Setup menu to adjust 3D brightness, the 3D display format and
other 3D settings.
Note: You should only adjust the 3D Format and Inverse 3D Glasses settings if 3D images aren't
displaying correctly. Changing these settings unnecessarily may cause problems with 3D
projection.
■
3D Display
Signal > 3D Setup > 3D Display
Enables or disables 3D mode. You can also change this setting by pressing the
button on the remote control.
■
2D-to-3D Conversion
Signal > 3D Setup > 2D-to-3D Conversion
Enable this setting to convert 2D images from an HDMI or WirelessHD source
(PowerLite Home Cinema 5020UBe only) into 3D content.
46
Making Detailed Adjustments
button on the remote control. See page 37 for more information.
2D/3D