Replacing The Lamp - Epson PowerLite Home Cinema 5020UB User Manual

Home theater projector
Hide thumbs Also See for PowerLite Home Cinema 5020UB:
Table of Contents

Advertisement

If the dirt is difficult to remove or the filter is broken, replace it. You can purchase air
filter part number V13H134A39 from an authorized EPSON reseller. To find the nearest
reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit
www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
7. Insert the air filter as shown.
8. Insert the outer edge of the air filter cover into the notches on the projector, then press in
on the inner edge of the cover to lock it into place, as shown below.

Replacing the Lamp

The projection lamp lasts for up to 4000 hours in Normal mode. You can use the Info menu
to check how long it's been in use (see page 76). It's time to replace the lamp when:
The projected image gets darker or starts to deteriorate.
The projector's lamp light flashes orange or red at half-second intervals.
The message
Note: Lamp life results will vary depending on mode selected, environmental conditions, and
usage.
Turn off this product when not in use to prolong the life of the projector.
72
Maintenance
appears on the screen when you start projecting.
Replace the lamp

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents