3D Setup - Epson powerlite home cinema 3010+ User Manual

■ Gamma
Image > Advanced > Gamma
Note: This setting cannot be used when the Color Mode is set to Auto (see page 30).
You can select from five gamma settings (2.0 to 2.4) or customize your own setting from
your image or a displayed graph. Lower values will increase the contrast of dark areas, but
tend to blur the bright areas. Higher values will darken the light areas. See page 31 for
more information.

3D Setup

Use this menu to adjust 3D brightness, the 3D display format and other 3D settings.
Note: You should only adjust the 3D Format and Inverse 3D Glasses settings if 3D images aren't
displaying correctly. Changing these settings unnecessarily may cause problems with 3D
projection.
■
3D Display
Signal > 3D Setup > 3D Display
Enables or disables 3D mode. You can also change this setting by pressing the
button on the remote control.
■
3D Format
Signal > 3D Setup > 3D Format
Use this setting to select the 3D format supported by your video device. In most cases,
the projector will correctly detect the 3D format when this option is set to
should only select the
projector doesn't properly display 3D images. See your video source documentation
for information on which mode to select.
■
3D Brightness
Signal > 3D Setup > 3D Brightness
Adjusts the brightness of 3D images. Select the
3D display is too dark.
Note: This setting is not available when 3D Format is set to Auto.
42
Making Detailed Adjustments
, , or
2D Side by Side
formats when your
Top and Bottom
or
Medium High
2D/3D
. You
Auto
settings if the