Epson PowerLite Home Cinema 5030UB Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PowerLite Home Cinema 5030UB
  6. Manual

Epson PowerLite Home Cinema 5030UB Manual

Document
Hide thumbs Also See for PowerLite Home Cinema 5030UB:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
®
PowerLite
Home Cinema
5030UB/5030UBe User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson PowerLite Home Cinema 5030UB

Summary of Contents for Epson PowerLite Home Cinema 5030UB

  • Page 1 ® PowerLite Home Cinema 5030UB/5030UBe User's Guide...

  • Page 3: Table Of Contents

    Contents PowerLite Home Cinema 5030UB/5030UBe User's Guide ............... 7 Introduction to Your Projector ........................8 Projector Features..........................8 Product Box Contents........................9 Additional Components ........................ 10 Optional Equipment and Replacement Parts................. 10 Warranty and Registration Information ..................11 Notations Used in the Documentation ....................12 Where to Go for Additional Information ....................
  • Page 4 Using Basic Projector Features ....................... 32 Turning On the Projector ........................32 Turning Off the Projector ........................33 Viewing 3D Images ..........................35 Pairing the 3D Glasses with the Projector..................36 Charging the 3D Glasses....................... 37 3D Viewing Range......................... 38 Selecting the Language for the Projector Menus................
  • Page 5 Connecting the WirelessHD Transmitter .................... 57 Viewing WirelessHD Content ......................58 Switching WirelessHD Sources......................59 Using the WirelessHD Picture-in-Picture Feature ................60 Adjusting the Menu Settings ........................62 Using the Projector's Menus....................... 62 Image Quality Settings - Image Menu ....................63 Input Signal Settings - Signal Menu....................
  • Page 6 Solutions When "Not Supported" Message Appears ..............98 Solutions When Only a Partial Image Appears ................98 Solutions When the Image is Not Rectangular ................99 Solutions When the Image Contains Noise or Static ..............99 Solutions When the Image is Fuzzy or Blurry ................100 Solutions When the Image Brightness or Colors are Incorrect ............

  • Page 7: Powerlite Home Cinema 5030Ub/5030Ube User's Guide

    PowerLite Home Cinema 5030UB/5030UBe User's Guide Welcome to the PowerLite Home Cinema 5030UB/5030UBe User's Guide.

  • Page 8: Introduction To Your Projector

    (PowerLite Home Cinema 5030UBe) Easy-to-use setup and operation features • Vertical keystone correction buttons for flexible projector placement • Epson's Instant Off and Direct Power On features for quick setup and shut down • 2.1× optical zoom ratio for improved zooming capability...

  • Page 9: Product Box Contents

    Product Box Contents Additional Components Optional Equipment and Replacement Parts Warranty and Registration Information Parent topic: Introduction to Your Projector Product Box Contents Save all the packaging in case you need to ship the projector. Always use the original packaging (or equivalent) when shipping.

  • Page 10: Additional Components

    • To receive and view a 3D signal, you need a compatible HDMI cable. You can purchase one from Epson or an authorized Epson reseller. If your video source is a 3D Blu-ray disc, you also need a Blu- ray player that supports 3D playback. See your local computer or electronics dealer for purchase information.

  • Page 11: Warranty And Registration Information

    In addition, Epson offers free Extra Care Home Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Home Service brochure for details.

  • Page 12: Notations Used In The Documentation

    View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24 hours a day. • If you still need help after checking this manual and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help".

  • Page 13: Projector Parts - Front/Top

    Projector Parts - Front/Top Lamp cover Horizontal and vertical lens shift dials Exhaust vent Remote receiver Lens shutter Lens Air intake/air filter cover Front adjustable foot Control panel Focus ring Zoom ring Parent topic: Projector Part Locations...

  • Page 14: Projector Parts - Rear

    Projector Parts - Rear Cable clip holes HDMI1 port HDMI2 port Component port Video port PC port (VGA) RS-232C port Trigger out port Service port Remote receiver AC input port Parent topic: Projector Part Locations Related tasks Installing a Security Cable...

  • Page 15: Projector Parts - Base

    Projector Parts - Base Front adjustable feet Mounting bracket holes Cable cover attachment point Air exhaust vent Caution: The air exhaust vent cools the WirelessHD receiver. If you mount the projector on the ceiling, make sure dust does not block the vent or the WirelessHD receiver can overheat. Parent topic: Projector Part Locations...

  • Page 16: Projector Parts - Control Panel

    Projector Parts - Control Panel Status light Lamp light Temp light Menu button (accesses projector menu system) Control panel cover...
  • Page 17 Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons Arrow buttons Esc button (cancels/exits functions) Enter button (selects options) Source button (cycles through the list of sources) Power button/light Parent topic: Projector Part Locations Related references Projector Light Status...

  • Page 18: Projector Parts - Remote Control

    Projector Parts - Remote Control On button (turns on projector) P-in-P button (controls the Picture-in-Picture function) Source buttons (selects specific video input sources)
  • Page 19 HDMI Link button (displays the settings menu for HDMI Link) Link Menu button (displays the main menu of the connected device) Control buttons (control playback and other features of connected devices that support the HDMI CEC standard) 2D/3D button (cycles between 2D and 3D modes) Arrow buttons (move though on-screen options) Default button (returns selected setting to default value) Menu button (accesses projector menu system)

  • Page 20: Setting Up The Projector

    Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
  • Page 21 Rear Front Ceiling Rear Ceiling...

  • Page 22: Projection Distance

    Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system.
  • Page 23 Screen or image size Projection distance (1) Offset from lens center Offset from lens center Wide to Tele 40 inches (101.6 cm) 57 to 121.7 inches 11 inches (28 cm) 35.0 inches (89 cm) (144 to 309 cm) 60 inches (152.4 cm) 85.8 to 183.5 inches 16.5 inches (42 cm) 52.4 inches (133 cm)

  • Page 24: Projector Connections

    Screen or image size Projection distance (1) Offset from lens center Offset from lens center Wide to Tele 100 inches (254 cm) 117.3 to 250.4 inches 22.4 inches (57 cm) 71.3 inches (181 cm) (298 to 636 cm) 120 inches (304.8 cm) 141.3 to 300.8 inches 26.8 inches (68 cm) 85.8 inches (218 cm)

  • Page 25: Connecting To Video Sources

    Related references Projector Setup Settings - Extended Menu Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector. Connecting to an HDMI Video Source Connecting to an MHL-Compatible Device Connecting to a Component Video Source Connecting to a Composite Video Source Parent topic: Projector Connections...

  • Page 26: Connecting To An Mhl-Compatible Device

    Parent topic: Connecting to Video Sources Related references Input Signal Settings - Signal Menu Connecting to an MHL-Compatible Device If you have an MHL-compatible smartphone or tablet, you can connect it to the WirelessHD Transmitter using either an MHL cable or an HDMI cable with a device-compatible MHL adapter (PowerLite Home Cinema 5030UBe only).

  • Page 27: Connecting To A Composite Video Source

    2. Connect the other end to the projector's color-coded Component video input ports. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source.

  • Page 28: Connecting To Computer Sources

    Parent topic: Connecting to Video Sources Connecting to Computer Sources Follow the instructions in these sections to connect a computer to the projector. Connecting to a Computer for VGA Video Connecting to a Computer for HDMI Video Parent topic: Projector Connections Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable.

  • Page 29: Connecting To External Speakers

    2. Connect the other end to one of the projector's HDMI ports. Parent topic: Connecting to Computer Sources Connecting to External Speakers To add sound, you can connect your video source and speakers to an audio video receiver, then connect the receiver to the projector using one of the receiver's compatible video outputs (an HDMI connection provides the best image quality, if available).

  • Page 30: Installing Batteries In The Remote Control

    Parent topic: Projector Connections Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.
  • Page 31 3. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.

  • Page 32: Using Basic Projector Features

    Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Viewing 3D Images Selecting the Language for the Projector Menus Adjusting the Image Height Image Shape Resizing the Image With the Zoom Ring Focusing the Image Using the Focus Ring Remote Control Operation...

  • Page 33: Turning Off The Projector

    2. Plug the power cord into an electrical outlet. The projector's power light turns blue. This indicates that the projector is receiving power. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 3.
  • Page 34 2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary).

  • Page 35: Viewing 3D Images

    You can view 3D images using your projector. Viewing 3D images requires a 3D-compatible video device and a pair of Epson RF 3D glasses. You can purchase Epson RF 3D glasses from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at epsonstore.com...

  • Page 36: Pairing The 3D Glasses With The Projector

    6. Put on the 3D glasses. If you do not see a 3D image, pair the glasses with the projector. Note: If you change the video source or you are not within range of your projector, the glasses enter standby mode and the indicator light flashes green. Slide the power switch on the glasses to the Off position and then back to the On position to resume 3D viewing.

  • Page 37: Charging The 3D Glasses

    5. Move the glasses within 10 feet (3 m) of the projector, then hold down the Pairing button on the glasses for at least three seconds. The status light on the glasses flashes green and red. If pairing is successful, the light turns green for 10 seconds and then turns off.

  • Page 38: 3D Viewing Range

    • Plug the other end of the charging cable into a USB to AC adapter with the following specifications: Input: 100-240V~0.15A 50-60Hz Output: 5V=1A The glasses are fully charged when the status light on the glasses stays green. Parent topic: Viewing 3D Images 3D Viewing Range When you view 3D images, make sure you are positioned within the viewing range shown here.

  • Page 39: Adjusting The Image Height

    2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Adjusting the Image Height...

  • Page 40: Image Shape

    If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Related concepts Image Shape Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level.

  • Page 41: Adjusting The Image Position Using Lens Shift

    3. Press a keystone button on the projector's control panel to adjust the image shape. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the Keystone settings in the projector menus.
  • Page 42 Note: The image cannot be moved to both the horizontal and vertical maximum values. V × 47% H × 96% Follow these guidelines when using lens shift to adjust your images: • When adjusting the image height, position the image lower than where you want it to be and then move it up using the vertical lens shift dial.

  • Page 43: Resizing The Image With The Zoom Ring

    Resizing the Image With the Zoom Ring 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Pattern button on the remote control. 2. To enlarge or reduce the image size, rotate the projector's zoom ring. Parent topic: Using Basic Projector Features Focusing the Image Using the Focus Ring...

  • Page 44: Remote Control Operation

    2. To sharpen the image focus, rotate the projector’s focus ring. Parent topic: Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here.
  • Page 45 Vertical 32 feet (10 m) ± 30° 60° 10°...

  • Page 46: Selecting An Image Source

    Horizontal 32 feet (10 m) ± 30° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.

  • Page 47: Projection Modes

    2. For video image sources, insert a DVD or other video media and press its play button, if necessary. 3. Do one of the following: • Press the Source button on the projector until you see the image from the source you want. •...

  • Page 48: Changing The Projection Mode Using The Menus

    • Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount. • Rear flips the image horizontally to project from behind a translucent screen. • Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind a translucent screen.

  • Page 49: Image Aspect Ratio

    Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal from your video source determines the image's aspect ratio. However, for certain images you can change the aspect ratio to fit your screen by pressing a button on the remote control. If you always want to use a particular aspect ratio for a certain video input source, you can select it using the projector's menus.

  • Page 50: Color Mode

    Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal. Normal Displays images using the full projection area and maintains the aspect ratio of the image. Zoom Displays images using the full width of the projection area and maintains the aspect ratio of the image.

  • Page 51: Changing The Color Mode

    Parent topic: Using Basic Projector Features Related references Image Quality Settings - Image Menu Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2.

  • Page 52: Turning On Auto Iris

    3D Images Color Mode Description 3D Dynamic Best for projecting in a bright room 3D Cinema Best for movies projected in a dark room 3D THX Best for projecting in a dark room Parent topic: Color Mode Turning On Auto Iris In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project.
  • Page 53 5. Press Menu or Esc to exit the menus. Parent topic: Color Mode...

  • Page 54: Adjusting Projector Features

    Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture Temporarily Projector Security Features Shutting Off the Picture Temporarily You can temporarily turn off the projected picture if you want to redirect your audience's attention during a presentation.

  • Page 55: Unlocking The Projector's Buttons

    1. Press the Menu button. 2. Select the Settings menu and press Enter. 3. Select the Lock Setting setting and press Enter. 4. Select one of these lock types and press Enter: • To lock the projector's power button, select Child Lock. To turn the projector on, you must press the power button for longer than three seconds.

  • Page 56: Installing A Security Cable

    Installing a Security Cable You can use the security slot on the back of the projector to attach a Kensington Microsaver Security system, available from Epson. Parent topic: Projector Security Features...

  • Page 57: Using Wirelesshd

    Using WirelessHD You can use the included WirelessHD transmitter to wirelessly stream HD content from a video device to the projector (PowerLite Home Cinema 5030UBe). WirelessHD Transmitter Placement Connecting the WirelessHD Transmitter Viewing WirelessHD Content Switching WirelessHD Sources Using the WirelessHD Picture-in-Picture Feature WirelessHD Transmitter Placement Keep these considerations in mind as you select a WirelessHD transmitter location: •...

  • Page 58: Viewing Wirelesshd Content

    2. Connect HDMI cables to your video devices and to the HDMI input ports on the side and back of the WirelessHD transmitter. 3. To use the WirelessHD transmitter as a pass-through device to a television or other display, connect an HDMI cable to the display device and to the HDMI output port on the back of the transmitter.

  • Page 59: Switching Wirelesshd Sources

    Note: If the WirelessHD connection fails, press the Setup button on the bottom of the WirelessHD transmitter and try again. Parent topic: Using WirelessHD Switching WirelessHD Sources If you have connected multiple HDMI input sources to your WirelessHD transmitter, you can use the projector remote control to switch between sources.

  • Page 60: Using The Wirelesshd Picture-In-Picture Feature

    2. Press the Input button repeatedly to highlight different input sources. 3. When you have highlighted the source you want to switch to, release the Input button. The display automatically switches to the highlighted source after a few seconds. Parent topic: Using WirelessHD Using the WirelessHD Picture-in-Picture Feature If you have connected multiple video sources to the WirelessHD transmitter, you can use the Picture-in-...
  • Page 61 • Press and hold the P-in-P button on the remote control to switch the sources shown in the main display and the sub-screen. 3. When you are finished watching Picture-in-Picture, press the P-in-P button on the remote control to resume normal projection. Parent topic: Using WirelessHD...

  • Page 62: Adjusting The Menu Settings

    Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Setup Settings - Extended Menu Projector Information Display - Info Menu Projector Reset Options - Reset Menu...

  • Page 63: Image Quality Settings - Image Menu

    2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter. 4.
  • Page 64 To change settings for an input source, make sure the source is connected and select that source. Setting Options Description Color Mode See the list of available Color Adjusts the vividness of image Modes colors for various image types and environments Brightness Varying levels available Lightens or darkens the overall...
  • Page 65 Epson Super White RGBCMY: Adjusts the hue, saturation, and brightness for each color Epson Super White: Reduces over-exposure of whites in your image; can be set only when Color Mode is set to Natural, Cinema, THX, 3D THX, or 3D Cinema.

  • Page 66: Input Signal Settings - Signal Menu

    Related concepts Color Mode Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.
  • Page 67 Setting Options Description 3D Setup 3D Display Selects various 3D options 2D-to-3D Conversion 3D Display: enables 3D mode 3D Format 2D-to-3D Conversion: converts 2D images to 3D 3D Depth 3D Format: selects the 3D Diagonal Screen Size format 3D Brightness 3D Depth: sets the depth for the Inverse 3D Glasses 3D image...
  • Page 68 Setting Options Description Deinterlacing Sets whether to convert interlaced-to-progressive signals Video for certain video image types Film/Auto Off: for fast-moving video images Video: for most video images Film/Auto: for movies, computer graphics, and animation Motion Detection 1 to 5 Selects how the image is converted to a progressive signal (Adjust this setting if you experience problems with still...
  • Page 69 Note: The Deinterlacing setting is available only for 480i, 576i or 1080i signals from Component, HDMI, or WirelessHD (PowerLite Home Cinema 5030UBe) video sources. Note: You can set the HDMI Video Range setting only when the Epson Super White setting is set to Off.

  • Page 70: Projector Feature Settings - Settings Menu

    Parent topic: Adjusting the Menu Settings Related concepts Image Aspect Ratio Related tasks Viewing 3D Images Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting Options Description Keystone Varying levels available Adjusts image shape to rectangular (vertically)
  • Page 71 Setting Options Description HDMI Link Device Connections Adjusts the HDMI Link options that allow the projector remote to HDMI Link control HDMI-connected devices Power On Link that support the CEC standard Power Off Link Device Connections: lists the devices connected to the HDMI1 and HDMI2 ports HDMI Link: enables or disables the HDMI Link function...
  • Page 72 Setting Options Description WirelessHD Device Connections Device Connections: displays a list of available WirelessHD (PowerLite Home Cinema WirelessHD devices 5030UBe) Reception WirelessHD: controls whether WiHD Mode the projector receives WirelessHD signals Reception: displays the strength of the WirelessHD signal WiHD Mode: adjusts the WirelessHD signal strength and range •...

  • Page 73: Projector Setup Settings - Extended Menu

    Setting Options Description User Button 2D-to-3D Conversion Assigns a menu option to the User button on the remote 3D Format control for one-touch access 3D Depth 3D Brightness Inverse 3D Glasses Power Consumption Info Parent topic: Adjusting the Menu Settings Related concepts Projector Security Features Projector Placement...
  • Page 74 Setting Options Description Operation Direct Power On Selects various operation options Sleep Mode Direct Power On: lets you turn Illumination on the projector without pressing Trigger Out the power button High Altitude Mode Sleep Mode: automatically turns off the projector after an interval of inactivity Illumination: turns off the lights on the projector...
  • Page 75 Setting Options Description Display Menu Position Selects various display options Menu Color Menu Position: adjusts the location where the menu is Messages displayed Display Background Menu Color: selects the color of Startup Screen the menu Standby Confirmation Messages: controls whether messages are displayed on the screen Display Background: selects...

  • Page 76: Projector Information Display - Info Menu

    Setting Options Description Panel Alignment Panel Alignment Corrects color misalignment in the projected image Select Color Panel Alignment: Enables color Pattern Color convergence (the alignment of Start Adjustments the red, blue and green colors in the projected image) adjustment Select Color: Specifies the color convergence to correct Pattern Color: Specifies the color pattern used during panel...
  • Page 77 Displays the number of hours (H) the lamp has been used in each Power Consumption mode; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Source Displays the name of the port to which the current input source is...

  • Page 78: Projector Reset Options - Reset Menu

    Information item Description Serial Number Displays the projector's serial number Version Displays the firmware version of the projector Parent topic: Adjusting the Menu Settings Related references Optional Equipment and Replacement Parts Related tasks Replacing the Lamp Resetting the Lamp Timer Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All option on the Reset menu.

  • Page 79: Maintaining And Transporting The Projector

    The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual.

  • Page 80: Cleaning The 3D Glasses

    • To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire.

  • Page 81: Air Filter And Vent Maintenance

    Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
  • Page 82 2. Press in on the inner edge of the air filter cover to release the latch, then pull to remove. 3. Pull the air filter out of the projector.
  • Page 83 4. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not use canned air;...

  • Page 84: Replacing The Air Filter

    6. Place the air filter back in the projector as shown. 7. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related tasks Replacing the Air Filter Replacing the Air Filter You need to replace the air filter in the following situations: •...

  • Page 85: Projector Lamp Maintenance

    3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 4. Place the new air filter in the projector as shown. 5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Projector Lamp Maintenance...

  • Page 86: Replacing The Lamp

    Replace the lamp as soon as possible when the following occurs: • The projected image gets darker or starts to deteriorate • A message appears when you turn on the projector telling you to replace the lamp • The projector's lamp light is flashing orange and its power light is flashing blue Replacing the Lamp Resetting the Lamp Timer Parent topic:...
  • Page 87 Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you open the lamp cover.
  • Page 88 6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 7.
  • Page 89 8. Push in the lamp firmly and tighten the screws to secure it. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage.

  • Page 90: Resetting The Lamp Timer

    Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly. Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information.
  • Page 91 Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 1. Open the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands.

  • Page 92: Transporting The Projector

    • When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic:...

  • Page 93: Solving Problems

    • The lights on the projector may indicate what the problem is. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems...
  • Page 94 • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help...
  • Page 95 Epson for help Flashing blue Flashing Flashing Auto Iris error; turn the projector off, orange orange unplug it, and contact Epson for help Flashing blue Orange Orange Power error (ballast); turn the projector off, unplug it, and contact Epson for help...

  • Page 96: Solving Image Problems

    Related tasks Cleaning the Air Filter Replacing the Lamp Replacing the Air Filter Solving Image Problems Check the solutions in these sections if you have any problems with projected images. Solutions When No Image Appears Solutions When "No Signal" Message Appears Solutions When "Not Supported"...

  • Page 97: Solutions When "No Signal" Message Appears

    • For images projected from applications using Windows DirectX, turn off DirectX functions. Parent topic: Solving Image Problems Related references Image Quality Settings - Image Menu Projector Setup Settings - Extended Menu Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: •...

  • Page 98: Displaying From A Mac Laptop

    Parent topic: Solutions When "No Signal" Message Appears Displaying From a Mac Laptop If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop for mirrored display. (See your laptop manual for details.) 1.

  • Page 99: Solutions When The Image Is Not Rectangular

    Related references Input Signal Settings - Signal Menu Supported Video Display Formats Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. •...

  • Page 100: Solutions When The Image Is Fuzzy Or Blurry

    Parent topic: Solving Image Problems Related references Input Signal Settings - Signal Menu Image Quality Settings - Image Menu Supported Video Display Formats Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry, try the following solutions: •...

  • Page 101: Solutions When A 3D Image Does Not Display Correctly

    Auto, but in some cases you may need to select a different setting to match the 3D signal from your video device. • Make sure you are using RF 3D active shutter glasses. You can purchase them from Epson. • Make sure your 3D glasses are turned on and fully charged. If the glasses have entered standby mode, slide the power switch on the glasses to the Off position and then back to the On position.

  • Page 102: Solutions When A Wirelesshd Source Does Not Display Correctly

    Related tasks Charging the 3D Glasses Pairing the 3D Glasses with the Projector Cleaning the 3D Glasses Solutions When a WirelessHD Source Does Not Display Correctly If a WirelessHD source does not display correctly, try the following solutions: • Open the WirelessHD reception monitor in the Settings menu and check the strength of the WirelessHD signal.

  • Page 103: Solutions To Projector Power Or Shut-Off Problems

    • The projector's buttons may be locked for security. Unlock the buttons or use the remote control to turn on the projector. • The power cord may be defective. Disconnect the cord and contact Epson. • If the projector's lamp shuts off unexpectedly, it may have entered sleep mode after a period of inactivity.

  • Page 104: Where To Get Help

    Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
  • Page 105 • Computer or video configuration • Description of the problem Purchase Supplies and Accessories You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online epsonstore.com (U.S.

  • Page 106: Technical Specifications

    Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supported Video Display Formats General Projector Specifications Type of display Poly-silicon TFT active matrix Resolution...

  • Page 107: Projector Lamp Specifications

    Image size 30 inches (0.76 m) to 300 inches (7.62 m) (in native aspect ratio) Projection distance 34 inches (0.87 m) to 754 inches (19.15 m) (in native aspect ratio) Projection methods Front, rear, ceiling-mounted Optical aspect ratio 16:9 (width-to-height) Focus adjustment Manual Zoom adjustment...

  • Page 108: Remote Control Specifications

    Height (excluding feet) 5.51 inches (140 mm) Width 18.35 inches (466 mm) Depth 15.55 inches (395 mm) Weight PowerLite Home Cinema 5030UB: 18.4 lb (8.4 kg) PowerLite Home Cinema 5030UBe: 18.9 lb (8.6 kg) Parent topic: Technical Specifications Projector Electrical Specifications...

  • Page 109: Projector Environmental Specifications

    For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
  • Page 110 Display format Refresh rate (in Hz) Resolution (in pixels) 60/70/75/85 1024 × 768 WXGA 1280 × 768 1366 × 768 60/75/85 1280 × 800 SXGA 70/75/85 1152 × 864 1280 × 960 1280 × 1024 WXGA++ 1600 × 900 Composite video TV (NTSC) 720 ×...
  • Page 111 Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (480i/480p) 720 × 480 SDTV (576i/576p) 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30/50/60 1920 × 1080 MHL input signals SDTV (480i/480p) 720 ×...
  • Page 112 Display format Refresh rate (in Hz) Resolution (in pixels) 3D formats HDTV750p (720p) 50/60 1280 × 720 Side by Side Top and Bottom HDTV1125i (1080i) 50/60 1920 × 1080 Side by Side HDTV1125p (1080p) 50/60 1920 × 1080 — 1920 × 1080 Side by Side Top and Bottom Parent topic:...

  • Page 113: Notices

    Important Safety Instructions FCC Compliance Statement Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to epson.com/recycle for information on how to return your products for proper disposal. Parent topic: Notices Important Safety Information Caution: Never look into the projector lens when the lamp is turned on;...

  • Page 114: Important Safety Instructions

    Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. •...
  • Page 115 • Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector. • If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation.
  • Page 116 • Do not store the projector outside of the required temperature range of 14 to 140 ºF (–10 to 60 ºC) or in direct sunlight for long periods of time. Doing so may cause damage to the case. • Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress.

  • Page 117: 3D Safety Instructions

    3D Safety Instructions Follow these 3D safety instructions when setting up and using the projector: • If you or any viewer experiences the following symptoms or other major discomfort from viewing 3D video images, immediately stop viewing and contact your health care provider: convulsions, eye or muscle twitching, loss of awareness, altered vision, involuntary movements, disorientation, eye strain, nausea/vomiting, dizziness, headaches, fatigue, or blurry/double vision that lasts longer than few seconds.

  • Page 118: Restriction Of Use

    • People who are sleep deprived • People who are physically tired • People under the influence of drugs or alcohol • Anyone who has ever experienced epileptic seizures or sensory disturbances triggered by flashing light effects • SOME LIGHT PATTERNS MAY INDUCE SEIZURES IN PERSONS WITH NO PRIOR HISTORY OF EPILEPSY.

  • Page 119: Trademarks

    HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing LLC. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

  • Page 120: Open Source Software License

    We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the GPL Programs, contact Epson as described in the User's Guide.
  • Page 121 Copyright (c) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users.
  • Page 122 Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License;...
  • Page 123 Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
  • Page 124 prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6.
  • Page 125 conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10.
  • Page 126 We provide the source code of the LGPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the LGPL Programs, please see the "EPSON Projector Contact List" in the User's Guide, and contact the customer support of your region.
  • Page 127 These LGPL Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. The list of LGPL Programs is as follows and the names of author are described in the source code of the LGPL Programs.
  • Page 128 To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you.
  • Page 129 In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non- free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
  • Page 130 You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library.
  • Page 131 Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
  • Page 132 during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above);...
  • Page 133 b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License.
  • Page 134 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
  • Page 135 If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).
  • Page 136 busybox-1.13.4 License terms of conditions of each program which are provided by owner of the copyright to the "BSD License" are as follows. Copyright (c) The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Kenneth Almquist. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 137 This distribution contains the sixth public release of the Independent JPEG Group's free JPEG software. You are welcome to redistribute this software and to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. LEGAL ISSUES ============ In plain English: 1.
  • Page 138 ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is NOT covered by the above copyright and conditions, but instead by the usual distribution terms of the Free Software Foundation; principally, that you must include source code if you redistribute it.
  • Page 139 If you modify libpng you may insert additional notices immediately following this sentence. This code is released under the libpng license. libpng version 1.2.6, August 15, 2004, through 1.2.49, March 29, 2012, are Copyright (c) 2004, 2006- 2009 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002 Glenn...
  • Page 140 libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt...
  • Page 141 zlib This projector product includes the open source software program "zlib" which applies the terms and conditions provided by owner of the copyright to the "zlib". The "zlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of zlib programs zlib-1.1.4 License terms of conditions of each program which are provided by owner of the copyright to the "zlib"...
  • Page 142 List of "mDNSResponder" mDNSResponder-107.6 (only mDNSResponderPosix is used) License terms "Apache License Version 2.0, January 2004" are as follows. Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
  • Page 143 Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing...
  • Page 144 file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
  • Page 145 END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format.
  • Page 146 Each file may have its own copyright/license that is embedded in the source file. Unless otherwise noted in the body of the source file(s), the following copyright notices will apply to the contents of the newlib subdirectory: (1) Red Hat Incorporated Copyright (c) 1994-2007 Red Hat, Inc.
  • Page 147 Copyright ©) 1991 by AT&T. Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software.
  • Page 148 Advanced Micro Devices, Inc. 29K Support Products Mail Stop 573 5900 E. Ben White Blvd. Austin, TX 78741 800-292-9263 (5) C.W. Sandmann Copyright (C) 1993 C.W. Sandmann This file may be freely distributed as long as the author's name remains. (6) Eric Backus (C) Copyright 1992 Eric Backus This software may be used freely so long as this copyright notice is left intact.
  • Page 149 THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. (11) Christopher G. Demetriou Copyright (c) 2001 Christopher G. Demetriou All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 150 SuperH, Inc. 405 River Oaks Parkway San Jose CA 95134 (13) Royal Institute of Technology Copyright (c) 1999 Kungliga Tekniska Hökolan (Royal Institute of Technology, Stockholm, Sweden). All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 151 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  • Page 152 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
  • Page 153 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  • Page 154 All rights reserved. Redistribution and use in source and binary forms is permitted provided that the above copyright notice and following paragraph are duplicated in all such forms. This file is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  • Page 155 THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
  • Page 156 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS"...
  • Page 157 Copyright (c) 1998, M. Warner Losh <imp@freebsd.org> All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 158 OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (33) - Daniel Eischen (targets using libc/posix) Copyright (c) 2001 Daniel Eischen <deischen@FreeBSD.org>. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 159 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ARM LTD BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED...
  • Page 160 * Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 161 Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial...
  • Page 162 (1) When this software is utilized in the form of source code, the above copyright declaration, these conditions of utilization, and the following stipulation of no guarantee shall be included in unchanged form inside the source code. (2) When this software is redistributed in a form in which it can be used in the development of other software, library form, etc., the above copyright display, these terms of utilization, and the following stipulation of no guarantee shall be inserted in documentation accompanying redistribution (user's manual, etc.).
  • Page 163 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.

  • Page 164: Copyright Notice

    Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

  • Page 165: A Note Concerning Responsible Use Of Copyrighted Materials

    Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. This information is subject to change without notice.

This manual is also suitable for:

Powerlite home cinema 5030ube

Table of Contents