Color Settings - Epson PowerLite Home Cinema 5020UB User Manual

Color Settings

If the image colors don't look correct, you can adjust them using these settings. Use the first
three settings described below to make the most visible changes. If you only need to make
slight adjustments, you can fine-tune the picture with the remaining settings. Most color
settings are stored separately for each image source and color mode.
■ Color Saturation
Image > Color Saturation
Note: This setting cannot be used with a signal input through the PC port.
Adjusts the color intensity of the image.
■ Tint
Image > Tint
Note: This setting cannot be used with a signal input through the PC port.
Shifts the color balance between magenta and green.
■ Abs. Color Temp.
Image > Abs. Color Temp.
Shifts the color balance between red and blue, making the image appear warmer or
cooler.
■ Skin Tone
Image > Skin Tone
Makes fine adjustments to the tint and controls the amount of red or green in the image.
Also useful for correcting black-and-white images, if they look tinted.
■ RGB
Image > Advanced > RGB
Use the RGB settings to fine-tune the color of the image. You can adjust the offset and
gain for each signal color (red, green, and blue). Use
for the lightest shades.
Gain
to adjust darker shades and
Offset
Making Detailed Adjustments
45