Restoring To Factory Default Settings - Lorex LH160 ECO6 SERIES Instruction Manual

15 Using the Main Menu
To upgrade the system firmware:
1. In your web browser, visit www.lorextechnology.com and search for the model number
of your DVR (check the label underneath your DVR for the model number). Download
the free firmware upgrade if one is available.
2. Extract the firmware into a blank USB flash drive. The firmware should be in a folder
named dvrupgrade. Ensure that this is the only folder in the USB drive.
3. Insert the flash drive into one of the USB ports.
4. Right-click to open the Menu Bar and click the Main Menu button (
5. Click Advanced.
6. Click Firmware Update.
7. Follow the on-screen instructions to update the firmware.
WARNING
Do not remove the USB flash drive or power off the DVR during the firmware update. Wait for the
system to reboot.

15.8.3 Restoring to Factory Default Settings

Restoring to factory default settings reverts any setting changes you have made to their
original settings. This does not affect the recordings saved on the DVR. You can reset a
single menu, or all menus.
To load system defaults:
1. Right-click to open the Menu Bar and click the Main Menu button (
2. Click Advanced. Then click Load Default.
#LX400007; r. 1.0/12121/12123; en-US
).
).
65