Configuring Display Settings; Configuring Privacy Zone Settings - Lorex LH160 ECO6 SERIES Instruction Manual

17 Using the PC/Mac Client Software

17.10 Configuring Display Settings

1. Click the Remote Setting tab, and then click Display>Live.
2. Configure the following:
• Channel: Select the channel you want to modify.
• Name: Enter the channel name if you want to re-name the channel
• Position: Select the position of where the title appears in the channel.
• Covert: Enable or Disable covert recording. Covert recording will hide the channel
on the DVR's local display. You will see be able to see the channel when you log in
remotely.
• Show Time: Select Enable or Disable to show or hide the time on the DVR's local
display.
• Record Time: Select Enable or Disable to show or hide the record time on the re-
mote display.
3. Click Save to apply your settings.

17.11 Configuring Privacy Zone Settings

CAUTION
Areas covered by privacy zones are not visible in recordings.
You can blank out a certain portion of the channel with a black box.
To configure a privacy zone:
1. Click the Remote Setting tab, and then click Display>Privacy Zone.
2. In the Channel drop-down menu, select the channel you wish to configure.
3. Select the Privacy Zone checkbox to enable privacy masking.
#LX400007; r. 1.0/12121/12123; en-US
82