Oil Warning System; Control Function; Engine Switch; Dc Protector - BOLIY Pro3600Si Owner's Manual

OIL WARNING SYSTEM

If the oil level falls below the safe operating level, the engine will stop automatically. Unless you refill with
oil, the engine will not start again.
NOTE:
If the engine stalls or does not start, turn the engine switch to "ON" position and then pull the recoil starter. If
the oil warning light flickers for a few seconds, the engine oil is low. Add oil and restart.

ENGINE SWITCH

The engine switch controls the ignition system.
A. Ignition circuit is switched on.
The engine can be started.
B. Ignition circuit is switched off.
The engine will not run.

DC PROTECTOR

The DC Protector turns of automatically when the loads exceeds the generator rated output.
NOTE:
If the DC Protector trips to the OFF position, press to reset. Reduce the load to the specified generator output if
the DC protector turns off. If it turns off again, consult the authorized dealer.
7
CONTROL FUNCTION CONTINUED
STOP
ON OFF
(PUSH)
PROTECTOR
ON
A
B