Engine Oil - BOLIY PRO3600SI User Manual

3.2 Engine Oil

Check Engine Oil leak
A. Checking Oil Level
Engine should be shut off and generator be on level ground when checking the oil level.
ON
OFF
1
AC
B. Changing engine oil
0 C
C SAE10W or 10W-30
B SAE#20 or 10W-30
32
F
1. Check engine oil level and
oil warning light
When start whether or not the
light ray.
Light ray- add oil
No light ray- ok
a
1
2. Remove the oil dipstick,Add the proper viscosity engine oil
to the upper limit if oil level is low. Be careful to over fill.
(1) Remove the bottom oil screw and unscrew oil drain plug to drain used
oil.
(2) Replace the drain plug and secure tightly.
(3) Add the proper viscosity oil to the upper oil limit level.
(4) Reinstall the dipstick and screw it tightly
5
2
25 C
Enginine
A SAE#30 or 10W-30
B SAE#20 or 10W-30
C SAE10W or 10W-30
0.6L (0.53imp qt 0.63 US qt)
80 F
Check the engine whether or not have leak oil.
If leak replace gasket, or oil seal or O ring.
17Nm(1.7 m.kg ,12 ft.ib)
12