Pre-Operation Check; Safety Information; Fuel System; Refueling And Fuel Level Gauge - BOLIY Pro3600Si Owner's Manual

Electric start digital generator dsp technology
Hide thumbs Also See for Pro3600Si:
Table of Contents

Advertisement

NOTE:
Pre-operation checks should be made each time the generator is used.

FUEL SYSTEM

Make sure there is sufficient fuel in the tank.
The engine must use regular unleaded gasoline with a pump octane number (R+M)/2) of 86 or higher, or research octane
number of 91or higher. E-85 is NOT recommended.

REFUELING AND FUEL LEVEL GAUGE

"F"
"E"
To refuel, remove cap and fuel slowly until fuel gauge indicates full.
WARNING
• Fuel
is high flammable and poisonous. Check "SAFETY INFORMATION" carefully before refueling.
• DO not fill above the top of fuel filler or it may overflow when the fuel the fuel heats up later and
expands.
• Wipe up any spilled fuel immediately.
• After refueling, make sure the tank cap is tightened.

ENGINE OIL

Make sure the engine oil is at the upper level of the oil filler hole. Add oil as necessary.
Recommended oil for most climates: 10W 30
For extremely cold conditions the oil viscosity may be lowered to ease starting: 5W 30
Engine Oil Quantity: 0.63 US qt
NOTE:
Recommended engine oil classification: API Service "SE" or "SF"; if not available, "SD"
CAUTION
The generator has been shipped without engine oil. Fill with oil or it will not start.

GROUND (EARTH)

Make sure to ground (Earth) the generator. SEE PAGE 17.
PRE OPERATION CHECKLIST
Recommended fuel: Unleaded gasoline
Fuel tank capacity: Total 2.1 US Gallons
Full
Empty
E
Fuel Level Gauge
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro3600si/e

Table of Contents