Supermicro SBI-7127R-S6 User Manual page 66

SBI-7127R-S6 Blade Module User's Manual
Table 5-7. PCIe/PCI/PnP Configuration Sub-menu
Menu Option
PCI ROM Priority
PCI Latency Timer
Above 4G Decoding
PERR# Generation
SERR# Generation
Maximum Payload
Maximum Read
Request
ASPM Support
Onboard LAN Option
ROM Select
Load Onboard LAN 1
Option ROM
Load Onboard LAN 2
Option ROM
Network Stack
Table 5-8. SuperIO Device Configuration Sub-menu
Menu Option
Super IO Chip
Serial Port 1
Configuration
Serial Port
Device Settings
Change Settings
Serial Port Mode
Description
Use this setting in case of multiple Option ROMs to specify what PCI Option
ROM to launch. Options include Legacy ROM and EFI Compatible ROM.
This sets the value to programmed into the PCI Latency Timer Register. Options
include 32, 64, 96, 128, 160, 192, 224 an 248.PCI Bus Clocks.
This setting allows you to Enable or Disable decoding of 64-bit capable devices
in the Above 4G Address Space. This setting is only usable if your system
supports 64-bit PCI decoding.
This setting allows you to Enable or Disable the PCI device to generate a
PERR#.
This setting allows you to Enable or Disable the PCI device to generate a
SERR#.
Use this setting to set the maximum payload of the PCI Express device or allow
the system BIOS to select the value. Options include Auto, 128 Bytes, 256
Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes or 4096 Bytes.
Use this setting to set the maximum read request size of the PCI Express device
or allow the system BIOS to select the value. Options include Auto, 128 Bytes,
256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes or 4096 Bytes.
This sets the ASPM Level for your system. Options include Disabled (disables
ASPM), Auto (lets BIOS auto configure) or Force L0s (force all links to L0s state).
This setting allows you to select the onboard LAN option ROM to be either PXE
or iSCSI. Note: If iSCSI is selected, LAN1 Option ROM select will cover all other
Oboard LANs.
This setting Enables or Disables onboard option ROM for LAN1.
This setting Enables or Disables onboard option ROM for LAN2.
This setting allows you to Enable or Disable the network stack (Pxe and UEFI).
Description
This static display shows the name of the Super IO chip installed for your
system.
This submenu allows you to configure Serial Port 1.
This setting allows you to Enable or Disable the Serial Port.
This static display shows device settings for serial port 1 configuration.
Use this setting to select an optimal setting for the Super IO device to use for the
Serial Port. Options include Auto, IO=3F8h/IRQ=4, IO=3F8h/IRQ=3~12,
IO=2F8h/IRQ=3~12, IO=3E8h/IRQ=3~12 and IO=2E8h/IRQ=3~12
This setting allows you to set the Serial Port Mode to either Normal or High
Speed.
5-10