Supermicro SBI-7127R-S6 User Manual page 37

Caution: Refer to the Supermicro website for updates on CPU support.
1. There are two load levers on the LGA2011 socket. To open the socket cover, first
press and release the load lever labeled 'Open 1st'
2. Press the second load lever labeled 'Close 1st' to release the load plate that covers
the CPU socket from its locking position
Press down on
Load the Lever
labeled 'Close 1st'
Figure 3-3. Open First Load Lever
Press down on Load
Lever labeled 'Open 1st'.
Figure 3-4. Close First Load Lever
Pull lever away from the socket
Chapter 3: Setup and Installation
(Figure
(Figure 3-4).
3-5
3-3).