HearthStone Morgan 8470 Owner's Manual page 28

Non-catalytic wood fireplace insert

Hide thumbs Also See for Morgan 8470:

Table of Contents

. Level the unit using a 9/16" and 7/16" wrench or ratchet on the three leveling bolts. (To level the rear

bolt, you must first loosen the jam nut at the base of the bolt)

. Attach the liner (See Owner's Manual for complete instructions)

Pull the flue liner into the firebox through the flue opening on top of the insert and attach to the flue

collar.

b. Locate the hardware kit in the owner's manual envelope. Once attached to the liner, push the flue

collar up and attach to the under side of the top castings. Mount the flue collar with the four ¼-20 nuts

and washers provided in the hardware kit.

HearthStone Quality Home Heating Products Inc ®

Leveling bolts

This end up !

Reversable Flue

(Front-Back)

3/8"

Medium

density

gasket

Morgan Model 8470

Table of Contents