Preparing The Morgan Wood Insert For Installation - HearthStone Morgan 8470 Owner's Manual

Preparing the Morgan Wood Insert for installation

(Refer to Owner's Manual for the complete installation instructions)
1
. Remove the contents within the firebox (owner's manual, baffle and soapstone refractory box)
Remove the hang tag on the front door and place in the owners manual)
2
. Using a ½" and 7/16" wrench, remove the left
and right pallet mounting clips. (Keep the ¼-20
bolt with a 7/16" head, as it will be used to
install the surround bracket) discard the pallet
clips and lag screws.
3
. Using a Phillips head screwdriver remove the four screws
holding the top heat shield on. Pull the heat shield away from the
unit and remove the flue collar.
4
. Remove the ash lip assembly by
loosening (NOT REMOVING) the
forward Phillips head screw on both
sides of the assembly and pulling
away from the unit.
5
.Remove the front façade by lifting and pulling away from the unit.
HearthStone Quality Home Heating Products Inc ®
25
Heat Shield
Ash lip
clamping bolt
Morgan Model 8470