Operation; Connecting And Powering Up Your Printer; Maintenance - NCI 125X User Manual

Operation

Connecting and
Powering Up
Your Printer
For DC modifi ed units
supplied with cable,
connect positive volt-
age to striped wire.
See the DC power
connection illustration
below:

Maintenance

Model 125X MiniPrinter Series User's Manual
1. Attach the appropriate cable between the printer
and your host device. The connector on the
printer side is "keyed" so that you cannot plug
the cable in the
that the pins should be positioned so that a
slight pressure will seat the cable properly. Do
not force the pins in. Doing so could damage the
cable.
2. Plug the power cord into the back of the printer.
Plug the transformer into an appropriate AC out-
let. The unit will power up automatically and print
Ready. This means the printer is ready to print.
The Paper Feed switch on the printer is a rocker
type switch. Push the left side of the rocker switch to
toggle the printer on and offl ine. Push the right side
of the switch to advance the paper.
Your printer is now ready for printing.
The printer stores characters for printing until one of
two things happens:
1. The line buffer is fi lled.
2. It receives a line feed (hexadecimal 0A) or a car-
riage return (hexadecimal 0D) code.
When (1) or (2) occurs, the printer prints out the
contents of its line buffer. If the buffer is empty when
the carriage return is received, the printer simply
advances the paper one line, leaving a blank line in
the printout.
When printing becomes faint or diffi cult to see, re-
place the ribbon in your printer with an NCI cartridge
ribbon.
Item
Black ribbon
Purple
Long-lasting Black
Wall mount power
Paper spindle
Paper roll 1.25" dia.
Paper roll 2.75" dia.
Almond paper cutter
Grey paper cutter
Clear plastic paper roll cover
wrong way. This means
NCI Part Number
22332-0029
22332-0011
22332-0045
114815534
109316536
22335-0018
22335-0026
23019-0019
23019-0043
115513184
11