NCI 125X User Manual page 16

Load Defaults
The complete list of
defaults is shown
in the Default Table
at the end of this
manual.
* The parallel interface
does not have these
selections.
Baud Rate
16
menu. The following is printed:
LOAD DEFAULTS gives you the opportunity to reset
the printer to all default settings (shown below).
Choose OK to do this or NEXT to go to the next
parameter. The following is printed:
Baud rate is the next parameter you can set in the
CONFIGURE menu. The complete list of parameters
and their possible values is shown below.
The sample list above shows the current baud rate
is 1200. To accept this, press OK (right side) or view
the next baud rate value by pressing NEXT (left
side). Press OK when the baud rate you want is
displayed. Choose from these baud rates: 300, 600,
1200, 2400, 4800, 9600, or 19200
Model 125X MiniPrinter Series User's Manual