NCI 125X User Manual page 8

8
4. Cut a straight edge on the paper roll if it is jag-
ged. This will facilitate the entry of the paper into
the printer.
5. Slide the paper through the slot connecting the
paper compartment and the printer compart-
ment. You can slide it in about one-quarter inch
before it stops.
6. While holding the paper in place, press the
rocker switch to the Paper Feed position. The
printer will activate, and a rubber roller will pull
the paper into the printer compartment. Hold the
switch in the Paper Feed position until the paper
emerges from the top of the printer mechanism.
7. When an inch of paper has emerged from the
top of he printer, release the Paper Feed button.
8. Now pull the paper through the printer, until
several inches are exposed.
9. Slide the paper through the slot in the printer
cover.
Model 125X MiniPrinter Series User's Manual