NCI 125X User Manual page 33

Set Time and Date
Control Code 20
Read Time and
Date Control
Code 22
Cancel Reverse
Field Control
Code 24
puted above. Here is an example of how this can be
done.
After typing RUN, your custom character will be
stored in the printer's memory. It will retain this
information until the printer is switched off or until you
write over the data by defi ning a different character.
To print your newly designed character, simply send
CHR$(126) which corresponds to hexidecimal value
7E.
This control code is used when setting the printer's
time and date clock. The format used is shown
below:
This control code is used to read the printer's time
and date clock. Time and date format is shown
below:
Sending this control code will turn OFF the reverse
fi eld mode that is selected using control code 25.
Model 125X MiniPrinter Series User's Manual
33