Changing The Printer Ribbon - NCI 125X User Manual

Changing the
Printer Ribbon
12
If your printer is used infrequently, the print impres-
sion may become weak because the ribbon has
dried out. To advance the ribbon to a new section,
hold down the Paper Feed switch for several sec-
onds.
Below are the steps for replacing the ribbon:
1. Turn the printer offl ine.
2. Four small grooves are embossed on each side
of the printer cover. Push down on one or both
of these areas until the printer cover tilts.
3. When the printer cover is tilted up, lift it com-
pletely off.
4. Push down on the right side of ribbon cartridge
where it is marked "PUSH". Remove the car-
tridge.
Model 125X MiniPrinter Series User's Manual