Configure - NCI 125X User Manual

This manual assumes
the time and date op-
tion are installed and
operating. If you do
not have this option
you will not see refer-
ences to the clock or
date listed in most
menus.

CONFIGURE

Model 125X MiniPrinter Series User's Manual
the switch. The following is printed:
If you wait less than three or more than fi ve seconds
Ready is printed and you will have to complete
steps 1 and 2 again to access the setup menu.
After you access the setup menu, if you press NEXT
(left side of switch) repeatedly you will see the follow-
ing list printed. If you keep pressing NEXT (left side)
the list repeats itself.
As you can see from the above printout the setup
menu contains the following items:
• CONFIGURE menu
• CUSTOM menu
• SET CLOCK menu
• RESET SEQ#
The following pages explain these items and how to
customize the printer to your needs.
The fi rst setup menu item reads
CONFIGURE [NEXT/OK]
[NEXT/OK] is a visual clue so you know that press-
ing the left side of the rocker switch will go to the
NEXT part of the menu and that pressing the right
side of the rocker switch will accept (or say OK to)
what this line of the setup menu says.
With the printer in the setup menu and with
CONFIGURE [NEXT/OK] as the last item printed,
press OK (right side) to access the CONFIGURE
15