Introduction; Installation; Installing The Paper - NCI 125X User Manual

Introduction

Installation

Installing the
Paper
Model 125X MiniPrinter Series User's Manual
The Model 125X impact printer series consists of
these models and electronic interfaces:
Model 1250 - RS-232
Model 1251 - Parallel
Model 1252 - TTL
Model 1253 - Current Loop
Model 1254 - RS485
This manual is split into the following main sections:
• Introduction
• Installation
• Operation
• Maintenance
• Printer Test and Setup
• Communication
Please follow the precautions listed below when set-
ting up your printer. They are designed to help you
keep your printer working at its best.
* Plug your power supply into an appropriate
grounded outlet.
* Place your printer on a fl at hard surface, like a
tabletop.
* Keep your printer out of direct sunlight.
1. Remove the printer cover by pressing on the
groove patterns to pop the front edge up. Lift off
the cover.
2. Press the rocker switch to the left. The light will
go off.
3. Unroll several inches of the paper.
7