Operation; Connecting And Powering Up Your Printer; Maintenance - NCI MiniPrinter 122 Series User Manual

Operation

1.
Connecting and Connecting and
Connecting and Connecting and Connecting and
P P P P P owering Up owering Up owering Up owering Up owering Up
Y Y Y Y Y our P our P our Printer our P our P rinter rinter rinter rinter
2.
For DC modified
units supplied with
cable, connect
positive voltage to
striped wire.
The Paper Feed switch on the printer is a rocker type
switch. Push the left side of the rocker switch to toggle
the printer on and offline. Push the right side of the switch
to advance the paper.
Your printer is now ready for printing.
The printer stores characters for printing until one of two
things happens:
1.
2.
When (1) or (2) occurs, the printer prints out the contents
of its line buffer. If the buffer is empty when the carriage
return is received, the printer simply advances the paper
one line, leaving a blank line in the printout.

Maintenance

When printing becomes faint or difficult to see, replace
the ribbon in your printer with an NCI cartridge ribbon.
Ribbon Type:
Black
Purple
Long-lasting Black
5 5 5 5 5
Attach the appropriate cable between the printer and
your host device. The connector on the printer side is
"keyed" so that you cannot plug the cable in the
wrong way. This means that the pins should be
positioned so that a slight pressure will seat the cable
properly. Do not force the pins in. Doing so could
damage the cable.
Plug the power cord into the back of the printer. Plug
the transformer into an appropriate AC outlet. The
unit will power up automatically and print R R R R R eady
means the printer is ready to print.
Its line buffer is filled.
It receives a line feed (hexadecimal 0A) or a carriage
return (hexadecimal 0D) code.
NCI Part Number:
223320029
223320011
223320045
eady eady. This eady eady