Troubleshooting; Led And Lcd Diagnosis; Media Problems - AMT Datasouth 4600 User Manual

Normally, if the printer is in not working properly, the "READY" LED blinks
continuously, and printing and communication between the host and printer
stops.

LED and LCD Diagnosis

Blinking LEDs indicate a problem. Check the LEDs and the LCD display and
refer to the following solutions:

Media Problems

LED/LCD
READY and MEDIA LEDs
LCD Display
Possible Problems
Mis-detected gap
Media out
Media not installed Install the media roll
Media jam
Note: If problem continues perform a label sensor calibration.

Troubleshooting

Blinking
MEDIA OUT
Solutions
Check the media path
Check the position of the
label sensor
Supply the media roll
Recover the jam
44
Indication
Remarks
For continuous media, check
application and driver, and
select continuous media.