Table of Contents
Advertisement
UNPACKING INSTRUCTIONS
Remove all parts and packing materials from
•
carton.
Check carton contents against list. Be sure all
•
parts are there.
TOOLS REQUIRED
½" Wrench (2)
•
•
/
" Wrench
9
16
/
" Socket wrench
•
9
16
•
Drill and
/
" bit
5
16
PARTS IDENTIFICATION
BAG
CONTAINERS
NOTE: When right hand (RH) and left hand (LH.) are mentioned in this manual, it means when seated
on the mower in the operator's position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
•
Place motion control levers in "NEUTRAL" position.
•
Set parking brake.
•
Turn ignition key "OFF" and remove key.
•
Make sure the blades and all moving parts have completely stopped.
•
Disconnect spark plug and place wire where it cannot come in contact with plug.
8
CONTAINER CONTENTS
3 - Soft Bag Containers
1 - Lower Chute
1 - Cover Assembly
1 - Catcher mount
COVER ASSEMBLY
UPPER CHUTE
1 - Upper Chute
1 - Catcher Hitch
1 - Cast Weight
Hardware
DUMP BAG
INDICATOR
CHUTE LATCH
LOWER CHUTE
Advertisement
Table of Contents
