Always observe safety rules when performing any
Before each use check for loose fasteners.
Clean unit thoroughly after each use.
for best results mower blades must be kept
sharp. Replace bent or damaged blades.
See BLADE CARE instructions in your mower
MAINTENANCE, SERVICE OR
Place motion control levers in
Set parking brake.
Place clutch control in
Turn ignition key to "OFF" position.
Make sure blades and all moving
parts have completely stopped.
Disconnect spark plug wire(s) from
spark plug(s) and place wire where
it cannot come in contact with plug.
Do not leave grass in bagger
containers. Empty containers after
each use and before storing. Failure
to do so may result in spontaneous
combustion which could develop
into a fire.
When grass catcher is to be stored for a period of
time, clean it thoroughly, remove all dirt, grass, leaves,
etc. Store in a clean, dry place.
Grass catcher components are
subject to wear, damage and
deterioration, which could expose
moving parts or allow objects to be
thrown. Frequently check components
and replace with manufacturer's
recommended parts when necessary.