Container Contents - Husqvarna 115 145727 Operator And Parts Manual

UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from
carton
• Check carton contents against list. Be sure all
parts are there.
TOOLS REQUIRED
½" Wrench (2)
/ " Wrench (2)
7
16
Drill
/ " Socket and Ratchet
9
16
Standard Screwdriver
PARTS IDENTIFICATION
COVER ASSEMBLY
BAG CONTAINERS
NOTE: When right hand (RH) and left hand (LH. are mentioned in this manual, it means when you are
seated on the mower in the operator's position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in "NEUTRAL" position.
• Turn ignition key "OFF" and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact
with plug.
/ " Wrench (2)
9
16
Ft/Lbs Torque Wrench
¼" and / " Drill Bits
5
16

CONTAINER CONTENTS

2 - Soft bag containers
1 - Upper Chute
1 - Cover Assembly
1 - Weight
UPPER CHUTE
1 - Bag of Hardware
1 - Lower Chute
1 - Mounting Hardware
LOWER CHUTE
7