Husqvarna 115 247227 R1 Operator's Manual page 13

10
FRONT WEIGHTS
2008 and Prior Models
1. Remove foot rest from the front of the mower.
2. Remove the two front bolts that secure the caster
to the sides of the frame.
3. Remove the two bolts that secure the caster to the
bottom of the frame.
4. Place weight bracket on the front of the frame.
5. Secure the weight bracket to the frame with the
four previously removed bolts.
6. Install weight to the weight bracket with two
/ -16 x 2 bolts and two
3
8
hardware.
7. Install foot rest on the weight bracket with six
#10-12 x 1¼ and two
new hardware.
NOTE: the shorter screws go in the center.
Foot Rest
Cast Weight
ASSEMBLY
/ -16 nuts from the new
3
8
#10-12 x 1 screws from the
Weight Bracket
CAUTION
DO NOT operate mower with grass
catcher, unless the front weights are
installed.
8063-054
13