Advertisement
UNPACKING INSTRUCTIONS
•
Remove all parts and packing materials
from carton.
•
Check carton contents against list. Be sure
all parts are there.
TOOLS REQUIRED FOR ASSEMBLY
(2) 1/2" Wrenches
(1) 9/16" Wrench
(1) 9/16" Socket wrench
PARTS IDENTIFICATION
COVER
ASSEMBLY
GRASS
CATCHER
CONTAINERS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you
are seated on the mower in the operator's position.
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in "NEUTRAL " position.
• Turn ignition key "OFF" and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact with plug.
6
CARTON CONTENTS:
3 - Container Tops
3 - Container Bottoms 2 - Weight Brackets
1 - Upper Chute
1 - Lower Chute
1 - Catcher Mount
1 - Cover Assembly
1 - Cast Weight
CAUTION
2 - Weight Plates
4 - Bolts 3/8-16 x 3 3/4"
8 - Nuts 3/8-16, nyloc
8 - Bolts 5/16-18 x 1", GR5
4 - Bolts 3/8-16 x 3 1/2", GR5
DUMP BAG
INDICATOR
UPPER CHUTE
LOWER CHUTE
CHUTE LATCH
LOWER CHUTE
ATTACHING
STRAPS
Advertisement
