Bag Of Parts; Carton Contents; Unpacking Instructions - Husqvarna C42C 954 04 05-09 Owner's Manual

For Parts Call K&T 606-678-9623 or 606-561-4983
KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER.
Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study
the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to
prevent injury to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in
severe eye damage. Always wear safety glasses or eye shields be fore starting your trac tor and while
mow ing. We recommend wide vision safety mask for over the spec tacles or stan dard safety glasses.

UNPACKING INSTRUCTIONS

• Remove all parts and packing materials from carton.
• Fold fl aps to inside of carton and turn carton upsidedown
on fl oor of work area. To protect grass catcher cover
during assembly place cover upsidedown on overturned
carton.
• Check carton contents against list. Be sure all parts
are there.
NOTE: For ease of assembly, aside of your work area, lay out all hardware in the following groups. Each step of the as-
sembly instructions will identify the group needed for that step.
ASSEMBLY
LOCATION
GROUP "A"
REAR
MOUNTING
BRACKET
TO
DRAW BAR
(4) Shoulder Bolt 5/16 - 18 Self Tapping
GROUP "B"
SUPPORT
POST
TO
CONTAINER
SUPPORT
GROUP "C"
SUPPORT
POST
TO
MOUNTING
BRACKET
BAG OF PARTS CONTENTS
HARDWARE SHOWN ACTUAL SIZE
(3) Carriage Bolt 5/16 - 18 x 3/4
(1) Bracket Support Pin
(1) Retainer Spring
www.mymowerparts.com

CARTON CONTENTS:

(2) Container Tops
(2) Container Bottoms
(1) Upper Chute
(1) Lower Chute
(1) Support Post
(4) Bolt 5/16 - 18 x 3/4
(3) Locknut 5/16-18
4
(1) Mounting Bracket
(1) Cover Assembly
(1) Cover Seal

(1) Bag of Parts

(1) Owner's Manual
(4) Locknut 5/16-18
(3) Tubing End Caps