Delivery And Dealer Service; Pre-Delivery Service - Husqvarna ZTH5223 Workshop Manual

DELIVERY AND DEALER SERVICE

Delivery and Dealer Service

Pre-delivery Service

1. Charge the battery.
2. Mount the rear tires.
3. Check and adjust the tire pressure in all
tires. All tires should be1 bar (15 PSI).
4. Fit the motion control levers in the normal
position.
5. Connect the rod to the seat stop.
6. Connect the contactor to the cable for the
seat's safety switch.
7. Fit the armrests to the seat's back
support.
8. Check that the engine has the right
quantity of oil.
9. Check that the hydraulic tank has the
right quantity of oil.
10. Adjust the position of the motion control
levers.
11. Fuel the mower and open the gas valve.
12. Connect exhaust fume extraction.
13. Start the engine.
14. Vent the hydraulic system.
15. .Check that there is drive to both wheels
16. Check mower deck settings.
17. Check:
The park brake safety switch.
The seat safety switch.
The motion control lever safety switches.
Correct park brake operation.
Forward drive.
Reverse drive.
Blade engagement.
18. Check the idling speed (1,550 ±50 rpm).
19. Check max. engine speed (2,800 ±75
rpm).
11
English-