Set Up Network - Cobalt Digital Inc CacheRaQ 4 User Manual

Appendix A: Using the LCD Console

Set up network

To reset the IP address or change the network configuration of the Network 1
interface:
1. On the LCD console, hold down the
seconds. The LCD screen displays:
SELECT:
SETUP NETWORK
2. Press the
E
3. Enter the IP address using the arrow buttons. The left and right arrow buttons
move the cursor position to the left or right. The up and down arrow buttons
increase or decrease the digit at the cursor position.
4. Press the
E
5. Enter the netmask using the arrow buttons.
6. Press the
E
7. Enter the Gateway using the arrow buttons.
8. Press the
E
9. Use the arrow buttons to toggle the cursor between [S]ave and [C]ancel.
If you select Save, the CacheRaQ 4 reboots using the new network
configuration. If you select Cancel, you return to step 1 of this procedure.
10. Press the
E
56
button.
button.
button.
button.
button.
Cobalt CacheRaQ 4 User Manual
button for approximately two
S