Phase 1: Making The Connection; Installing The Cacheraq 4 - Cobalt Digital Inc CacheRaQ 4 User Manual

Chapter 2: Setting up the CacheRaQ 4
ISP POP environment, this can be done by configuring your access concentrators
to use the CacheRaQ 4 as the gateway. Appendix C describes sample network
configurations.
If you use Traditional Proxy mode, the HTTP and FTP proxy port numbers for
browser configuration are both 3128 by default (they can be changed as described
later in this chapter). Alternatively, you can configure the browsers to use the
CacheRaQ 4's proxy auto-configuration (PAC) file; the URL for this file is
http://<cacheraq-name>/proxy.pac.

Phase 1: Making the connection

Installing the CacheRaQ 4

You can place the CacheRaQ 4 on a flat surface — for example, a desk, shelf or
table top — or install it in a standard 19-inch equipment rack.
Caution: If you operate the CacheRaQ 4 in an equipment rack, see
the precautions described in "Operating the unit in an equipment
!
rack," on page ii.
If you plan to use the CacheRaQ 4 on a flat surface, attach the rubber feet to the
five indentations on the bottom of the case. See Figure 4.
Figure 4. Rubber feet for the CacheRaQ 4
12
Rubber feet
Cobalt CacheRaQ 4 User Manual
S
E