Table of Contents
Advertisement
Phase 2: Setting up with the Web browser
Configuring the CacheRaQ 4 with the Setup
Wizard
To configure the CacheRaQ 4, enter information into the fields on the Setup
Wizard screens. These fields are described in the sections that follow.
The Setup Wizard is a series of five screens that guide you through the setup
process. After completing each step, click on the NEXT button to apply the
changes and move on to the next step. You can return to earlier screens by
clicking on the BACK button.
The CacheRaQ 4 performs automatic checks on the information entered and
alerts you when an illegal value or a problem is encountered. When the
information is entered correctly at each stage, the CacheRaQ 4 enters the changes
in its configuration files before proceeding to the next step. Changes may take
several seconds to complete.
All of the Setup Wizard configuration options can be accessed from the
CacheRaQ 4's normal Web interface, so you can change or view the settings after
finishing the Setup Wizard.
The Setup Wizard presents the following four steps, each with its individual
screen: Cache Setup, Network Setup, Administrator Setup, and Time and Time
Zone Setup. Cobalt recommends that you read through the descriptions of these
screens before you begin, to make sure you have all the required information.
Cobalt CacheRaQ 4 User Manual
19
Advertisement
Table of Contents
