Call Diversion Features; Fixed Call Forwarding - Siemens Hicom 300 User Manual

Fixed Call Forwarding

Your line can be forwarded to a fixed destination for answering.
This can be to either a Digital, analogue extension or external number.
Programme or Change Fixed Call Forwarding
- press Programme key
- press Call Forward key twice or dial ∗ ∗ ∗ ∗ ∗ 11
- dial required extension number or 0 and external number
- press Programme key
- Call Forward LED is on (if equipped)
The Fixed Call Forward destination has now been permanently programmed.
Calls will now go to the Fixed Call Forward destination immediately.
When you lift your handset, special dial tone will also be heard to remind you
that the feature is activated.
Deactivate Fixed Call Forwarding
- press Call Forward key or dial # 10
- Call Forward LED goes off (if equipped)
When Fixed Call Forward destination has been programmed but deactivated
it will serve as Call Forward No Answer i.e. If your extension rings for longer
than a predetermined time it will automatically divert to the Fixed destination.
Reactivate Fixed Call Forwarding
- press Call Forward key or dial ∗ ∗ ∗ ∗ ∗ 10
- Call Forward LED is on (if equipped)
Calls will now go to the Fixed Call Forward destination immediately.
17