Adjustment Of Cutting Height; Wheel Motor Adjustment; Moving Machine By Hand - Husqvarna WH4817EFQ2, WH5219EFQ Operator's Manual

Adjustment of cutting height

Floating deck machines
1. Stop the mower and disengage the
blades.
2. Raise the deck height lever to the
transport position.
3. Remove the height adjustment pin and
place it in the desired cutting height hole.
Move deck height lever down onto the
pin and mow.
IMPORTANT INFORMATION
Anti-scalp rollers must be in the proper
position for maximum deck floatation. See
the decal on the front deck.

Wheel Motor Adjustment

It is possible to adjust the height of the wheel
motor and the caster wheels, if necessary. Go
to your Husqvarna dealer to adjust the height
of the wheel motor and the caster wheels.

Moving Machine by Hand

In order for the machine to be moved with the
engine turned off, the vent screws on both
hydraulic pumps must be opened 1/4-1/2 turn.
WARNING!
Make no adjustments without:
- the engine stopped,
- the ignition key removed,
- the parking brake activated.
34
English-
OPERATION
1. Deck height lever
2. Transport position latch
3. Height adjustment pin
Deck height lever
Vent screw on the hydraulic pump
8011-401
8011-507