Stopping - Husqvarna WH4817EFQ2, WH5219EFQ Operator's Manual

Stopping

Emergency stop
Release both hands from the operator
presence lever handles.
When both operator presence levers return to
their outer position, the engine will quit and
the mower will stop.
or
Pull both motion control levers firmly towards
the handle grips and hold them securely in
place. Use thumbs to lift the neutral bail up
into the neutral slot. Then stop engine by
pulling throttle control back and shut off the
key switch.
Normal operating stop
1. Pull both motion control levers firmly
toward the handle grips to stop forward
motion.
2. Use thumbs to lift neutral bail into the
neutral slots.
3. Move the throttle control to the slow
position.
4. Move blade engagement control to the
off position.
5. Stop engine, refer to "Stopping the
Engine" on page 33.
32
English-
OPERATION
IMPORTANT INFORMATION
Close fuel valve at the end of each mowing
job.