Table of Contents
Advertisement
Blade replacement
WARNING!
Blades are sharp. Protect your
hands with gloves and/or wrap
blades with a heavy cloth when
handling.
•
Remove blade bolt by turning
counterclockwise.
IMPORTANT INFORMATION
To ensure proper assembly, center hole in
blade must align with star on cutter housing.
•
Install new or re-sharpened blade with
stamped "GRASS side" facing towards
ground/grass (down) or "THIS SIDE UP"
facing deck and cutter housing.
•
Install and tighten blade bolt securely.
Tightening torque 90 ft/lb (122 Nm).
IMPORTANT INFORMATION
Special blade bolt is heat treated. Replace
with a Husqvarna bolt if required. Do NOT
use lower grade hardware than specified.
48
English-
MAINTENANCE
1.
Blade
2.
Center hole
3.
Star
4.
Cutter housing
5.
Blade bolt (special)
Blade attachment, principal
8011-671
Advertisement
Table of Contents
