Table of Contents
Advertisement
Adjusting the Mower Deck
Leveling
1.
Position the mower on a level, preferably
concrete, surface.
2.
Check the pressure in all four tires. See
"Technical Data" on page 78
3.
Raise the mower on lengths of 2" x 4"
placed edgewise under the cutting deck
from front to rear (see illustration).
4.
Set the cutting height to 4" using the
lever.
5.
Adjust the four lower chain bolts so that
they are centered in the oblong slots.
6.
Move the lifting lever and check that all
the chains are equally tensioned. If they
are not, adjust the appropriate lower
chain bolt in its slot.
Adjusting Cutting Height
1.
Raise and secure the deck height lever
to the transport position (6").
2.
Measure from the cutting edge of the
blades to the flat level surface. The
distance should be 6" (150 mm).
3.
Drop and secure the lever at (for
example) the 2" cutting height. Measure
as above. The distance should be 2" (50
mm).
MAINTENANCE
.
Leveling the mower deck, hang chain version
8011-427
45
English-
Advertisement
Table of Contents
