Lubrication; Lubrication Schedule; General - Husqvarna WH4817E, WH3615E Operator's Manual

Lubrication

Lubrication Schedule

12/12 1/52 1/365
Lubrication schedule
12/12 Every year
1/52 Every week
1/365 Every day

General

Remove the ignition key to prevent unintentional movements during lubrication.
When lubricating with an oil can, it should be filled with engine oil.
When lubricating with grease, unless otherwise stated, with a high grade molybdenum disulfide grease or
another chassis or ball bearing grease offering good corrosion protection should be used.
For daily use, the machine should be lubricated twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt continues to slip after cleaning with spirits, it must be
replaced. Gasoline or other petroleum products must not be used to clean belts.
LUBRICATION
Lubricate with grease gun
Oil change
Filter change
25h 50h 100h 200h 300h
Lubricate with oil can
Level check
8011-677
45
English-